| |
Chevrolet Kent-Moore Tools • Engine Cooling System Tools • 1930s 1940s |
|
| |
|
|
| |
The automotive tools listed here were made by the Kent-Moore Organization, Inc. of Detroit, Michigan in the 1930s and 40s for service work on General Motors cars and trucks. I am always happy to buy or trade for these or similar Kent-Moore automotive tools made for use on Chevrolet cars and trucks of the 1930s and 40s. I'm easy to work with, open to change, and totally respectful of your personal style. If you have old Kent-Moore automotive tools for sale or trade, please contact me. I look forward to hearing from you. |
|
| |
|
|
| |
Chevrolet Kent-Moore Engine Cooling System Tools Wanted
|
|
| |
| |
|
Tool ID |
|
Description |
| |
|
|
|
|
 |
|
.613 |
|
Water Pump Bushing Reamer
1934-36 All Passenger Cars and Trucks |
|
|
| |
|
|
| |
.613 Water Pump Bushing Reamer
This spiral fluted reamer is adaptable to all model water pump bushings. Use with tee handle wrench. |
|
| |
|
|
| |
|
|
| |
|
|
| |
| |
|
Tool ID |
|
Description |
 |
|
E-4 |
|
Water Pump Bushing Driver
1934-36 Models
This driver is used to remove or replace water pump bushings. It should be used under an arbor press.
|
|
|
| |
|
|
| |
|
|
| |
|
|
| |
| |
|
Tool ID |
|
Description |
 |
|
J-708A |
|
Radiator Flusher
All Passenger Cars and Trucks
J-708-14 Flusher Inlet Elbow Assembly
Includes J-708-2 Air Valve
J-708-15 Outlet Casting Assembly
Includes J-708-5 Rubber Hose
J-708-17 Heater Flusher Attachment
|
|
|
| |
|
|
| |
J-708A Radiator Flusher
Every car and truck should have its cooling system flushed out thoroughly at least twice yearly. The cooling system accumulates rust and corrosion from the water jackets, forming a scale that eventually clogs the water passages if not removed. Flushing harmful scale from the cooling system maintains vehicle performance and economy. This efficient, low priced tool is complete with one intake casting with air valve and water hose connection, one discharge casting and tube assembly, and one special fitting for flushing hot water heaters. |
|
| |
|
|
| |
|
|
|
|
|
Reverse flushing radiator |
|
Flushing engine water jacket |
|
Flushing hot water heater |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
| |
|
Tool ID |
|
Description |
 |
|
J-974-A |
|
Water Pump Service Tool Set
1937-38 Passenger Cars and Trucks |
|
|
| |
|
|
| |
J-974-A Water Pump Service Tool Set
Proper replacement of new water pump bushings, packing and oil reservoir is assured by using this set of tools. They perform the work quickly, accurately and without damage to parts.
After the old front and rear bushings have been removed with a T120-2 Bushing Puller, fit a new front bushing on Driver (J-974-1) and install the Driver Pilot Bushing (J-974-2) in the rear bushing hole of the pump. Press the front bushing in place under an arbor press. Driver Pilot Bushing (J-974-2) assures perfect alignment of the Driver (J-974-1) as it presses in the bushing, and sizes it as well.
Remove Packing Installing Sleeve (J-974-3) and install one spring seat with the open "V" shaped side towards the packing. Install the packing spring and assemble the other spring seat with the open "V" shaped side towards the rear. Again insert the Packing Installing Sleeve (J-974-3) in the rear bushing hole and install four packing rings with the grooved side towards the rear and press in place with the Packing Driver (J-974-4).
To replace the rear bushing, place the new bushing on the Driver (J-974-1) with the flat end against the driver head and pilot the driver into the front bushing and press the rear bushing in place, flush with the housing. Now place the Oil Reservoir on the end of the pump housing and use Replacer (J-974-A1) under an arbor press and force the reservoir tight in place.
The Spacer (J-974-A4) included with these tools is used in Driver (J-974-A1) when replacing the Reservoir on 1937 models. The long Reservoir on 1938 models does not require the use of the spacer. After using, clean the tools, oil them well and replace in the metal box provided. |
|
| |
|
|
| |
|
|
| |
|
|
| |
| |
|
Tool ID |
|
Description |
 |
|
K-341 |
|
Radiator Core Cleaner
All
Passenger Cars and Trucks
Low cost tool that cleans dirt and bugs out of the radiator core. It is difficult to clean a radiator core properly with an ordinary garden hose, but this tool does it efficiently. The tool attaches to a regular water hose and shoots water straight through the radiator core, cleaning the core thoroughly to improve radiator cooling efficiency.
|
|
|
| |
|
|
| |
|
|
| |
|
|
| |
| |
|
Tool ID |
|
Description |
 |
|
KMO-102 |
|
Rubber Hose Cutter
All Passenger Cars and Trucks
This simple tool cuts radiator hose and all other kinds of rubber hose. Sturdy in construction with steel cutter blade and measuring scale, this tool provides quick, clean accurate work.
|
|
|
| |
|
|
| |
|
|
| |
|
|
| |
| |
|
Tool ID |
|
Description |
 |
|
KMO-1232-A |
|
Water Pump Packing Wrench
1934-36 Passenger Cars and Trucks
This tool is especially made for working in the close space where the water pump adjusting nut is located.
|
|
|
| |
|
|
| |
|
|
| |
|
|
| |
| |
|
Tool ID |
|
Description |
| |
|
|
|
|
 |
|
T-120-2 |
|
T-120-2 Water Pump Bushing Puller
1937-38 Passenger Cars and Trucks
This bushing puller is used just like a tap. It is threaded into the bushing tightly, then the bushing is forced out under an arbor press.
|
|
|
| |
|
|
| |
|
|
| |
|
|
